Action

SCPI Commands

CALL:BLUetooth:SIGNaling<Instance>:CONNection:ACTion:LESignaling
CALL:BLUetooth:SIGNaling<Instance>:CONNection:ACTion

class Action

Action commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

set_le_signaling(action: RsCmwBluetoothSig.enums.ConnectionActionLe) → None

# SCPI: CALL:BLUetooth:SIGNaling<Instance>:CONNection:ACTion:LESignaling
driver.call.connection.action.set_le_signaling(action = enums.ConnectionActionLe.CONNect)

Requests the R&S CMW to perform certain signaling actions for LE. It has no query form: the current signaling state can be retrieved using the method RsCmwBluetoothSig.Connection.State.LeSignaling.fetch command.

param action

INQuire | SINQuiry | CONNect | SCONnecting | DETach | TMConnect INQuire: Switch on master signal and start inquiry for Bluetooth devices within range Inquiry stops after a configurable maximum duration (see method RsCmwBluetoothSig.Configure.Connection.Inquiry.Duration.leSignaling) or after a configurable number of responses (see method RsCmwBluetoothSig.Configure.Connection.Inquiry.NoResponses.leSignaling) SINQuiry: Stop inquiry, switch off master signal and return to standby state CONNect: Switch on master signal, start paging the selected Bluetooth device and establish an ACL connection SCONnecting: Stop an ongoing connection setup, switch off the master signal and return to standby state DETach: Detach an established connection, switch off the master signal and return to standby state TMConnect: Connect test mode - switch on master signal, start paging the selected Bluetooth device, establish a LE test mode connection, and transmit test packets

set_value(action: RsCmwBluetoothSig.enums.ConnectAction) → None

# SCPI: CALL:BLUetooth:SIGNaling<Instance>:CONNection:ACTion
driver.call.connection.action.set_value(action = enums.ConnectAction.ADConnect)

Requests the R&S CMW to perform certain signaling actions for BR/EDR. It has no query form: the current signaling state can be retrieved using the method RsCmwBluetoothSig.Connection.State.fetch command.

param action

INQuire | SINQuiry | SCONnecting | STMode | CONNect | TMConnect | DETach | REController | EMConnect | EXEMode | ENEMode | HFPConnect | EXHFp | ENHFp | AGConnect | ENAGate | EXAGate | ADConnect | AUDConnect | ADEXit | ADENter INQuire: Switch on master signal and start inquiry for Bluetooth devices within range Inquiry stops after a configurable maximum duration (see method RsCmwBluetoothSig.Configure.Connection.Inquiry.ilength) or after a configurable number of responses (see method RsCmwBluetoothSig.Configure.Connection.Inquiry.NoResponses.value) SINQuiry: Stop inquiry, switch off master signal and return to standby state SCONnecting: Stop an ongoing connection setup, switch off the master signal and return to standby state STMode: Stop a test mode connection, switch off the master signal and return to standby state CONNect: Switch on master signal, start paging the selected Bluetooth device and establish an ACL connection TMConnect: Switch on master signal, start paging the selected Bluetooth device and establish a test mode connection DETach: Detach an established connection, switch off the master signal and return to standby state REController: Run EUT controller to reset and initialize the EUT via USB connection EMConnect: Connect audio echo mode EXEMode: Exit audio echo mode ENEMode: Enter audio echo mode HFPConnect: Connect hands-free profile EXHFp: Exit hands-free profile ENHFp: Enter hands-free profile AGConnect: Connect hands-free audio gateway profile ENAGate: Enter hands-free audio gateway profile EXAGate: Exit hands-free audio gateway profile ADConnect: Connect A2DP AUDConnect: Connect audio mode ADEXit: Exit audio mode ADENter: Enter audio mode