LowEnergy¶
SCPI Commands
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LRANge
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LE2M
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LE1M
- class LowEnergy[source]
LowEnergy commands group definition. 3 total commands, 0 Sub-groups, 3 group commands
- get_le_1_m() → bool[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LE1M value: bool = driver.configure.rfSettings.dtx.sing.fdrift.tmode.lowEnergy.get_le_1_m()
- Enable/disable the periodic change of frequency offset.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
freq_drift: OFF | ON
- get_le_2_m() → bool[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LE2M value: bool = driver.configure.rfSettings.dtx.sing.fdrift.tmode.lowEnergy.get_le_2_m()
- Enable/disable the periodic change of frequency offset.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
freq_drift: OFF | ON
- get_lrange() → bool[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LRANge value: bool = driver.configure.rfSettings.dtx.sing.fdrift.tmode.lowEnergy.get_lrange()
- Enable/disable the periodic change of frequency offset.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
freq_drift: OFF | ON
- set_le_1_m(freq_drift: bool) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LE1M driver.configure.rfSettings.dtx.sing.fdrift.tmode.lowEnergy.set_le_1_m(freq_drift = False)
- Enable/disable the periodic change of frequency offset.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param freq_drift
OFF | ON
- set_le_2_m(freq_drift: bool) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LE2M driver.configure.rfSettings.dtx.sing.fdrift.tmode.lowEnergy.set_le_2_m(freq_drift = False)
- Enable/disable the periodic change of frequency offset.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param freq_drift
OFF | ON
- set_lrange(freq_drift: bool) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:FDRift:TMODe:LENergy:LRANge driver.configure.rfSettings.dtx.sing.fdrift.tmode.lowEnergy.set_lrange(freq_drift = False)
- Enable/disable the periodic change of frequency offset.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param freq_drift
OFF | ON