LowEnergy¶
SCPI Commands
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LRANge
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LE2M
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LE1M
- class LowEnergy[source]
LowEnergy commands group definition. 3 total commands, 0 Sub-groups, 3 group commands
- get_le_1_m() → float[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LE1M value: float or bool = driver.configure.rfSettings.dtx.sing.mindex.stable.tmode.lowEnergy.get_le_1_m()
- Specifies the modulation corruption of the signal. Modulation index of 0.5 means no corruption.
INTRO_CMD_HELP: Refer also to the following commands:
LE direct test mode:
- Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
mod_index: numeric | ON | OFF Range: 0.4 to 0.6 Additional ON/OFF enables/disables modulation index.
- get_le_2_m() → float[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LE2M value: float or bool = driver.configure.rfSettings.dtx.sing.mindex.stable.tmode.lowEnergy.get_le_2_m()
- Specifies the modulation corruption of the signal. Modulation index of 0.5 means no corruption.
INTRO_CMD_HELP: Refer also to the following commands:
LE direct test mode:
- Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
mod_index: numeric | ON | OFF Range: 0.4 to 0.6 Additional ON/OFF enables/disables modulation index.
- get_lrange() → float[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LRANge value: float or bool = driver.configure.rfSettings.dtx.sing.mindex.stable.tmode.lowEnergy.get_lrange()
- Specifies the modulation corruption of the signal. Modulation index of 0.5 means no corruption.
INTRO_CMD_HELP: Refer also to the following commands:
LE direct test mode:
- Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
mod_index: numeric | ON | OFF Range: 0.4 to 0.6 Additional ON/OFF enables/disables modulation index.
- set_le_1_m(mod_index: float) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LE1M driver.configure.rfSettings.dtx.sing.mindex.stable.tmode.lowEnergy.set_le_1_m(mod_index = 1.0)
- Specifies the modulation corruption of the signal. Modulation index of 0.5 means no corruption.
INTRO_CMD_HELP: Refer also to the following commands:
LE direct test mode:
- Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param mod_index
numeric | ON | OFF Range: 0.4 to 0.6 Additional ON/OFF enables/disables modulation index.
- set_le_2_m(mod_index: float) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LE2M driver.configure.rfSettings.dtx.sing.mindex.stable.tmode.lowEnergy.set_le_2_m(mod_index = 1.0)
- Specifies the modulation corruption of the signal. Modulation index of 0.5 means no corruption.
INTRO_CMD_HELP: Refer also to the following commands:
LE direct test mode:
- Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param mod_index
numeric | ON | OFF Range: 0.4 to 0.6 Additional ON/OFF enables/disables modulation index.
- set_lrange(mod_index: float) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:MINDex:STABle:TMODe:LENergy:LRANge driver.configure.rfSettings.dtx.sing.mindex.stable.tmode.lowEnergy.set_lrange(mod_index = 1.0)
- Specifies the modulation corruption of the signal. Modulation index of 0.5 means no corruption.
INTRO_CMD_HELP: Refer also to the following commands:
LE direct test mode:
- Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param mod_index
numeric | ON | OFF Range: 0.4 to 0.6 Additional ON/OFF enables/disables modulation index.