LowEnergy¶

SCPI Commands

CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LRANge
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LE2M
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LE1M

class LowEnergy[source]

LowEnergy commands group definition. 3 total commands, 0 Sub-groups, 3 group commands

get_le_1_m() → RsCmwBluetoothSig.enums.SymbolTimeErrorLe[source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LE1M
value: enums.SymbolTimeErrorLe = driver.configure.rfSettings.dtx.sing.stError.tmode.lowEnergy.get_le_1_m()

Specifies the symbol timing error of the LE signal.

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

symbol_time_err: OFF | NEG50 | POS50 No symbol timing error, - 50 ppm or 50 ppm

get_le_2_m() → RsCmwBluetoothSig.enums.SymbolTimeErrorLe[source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LE2M
value: enums.SymbolTimeErrorLe = driver.configure.rfSettings.dtx.sing.stError.tmode.lowEnergy.get_le_2_m()

Specifies the symbol timing error of the LE signal.

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

symbol_time_err: OFF | NEG50 | POS50 No symbol timing error, - 50 ppm or 50 ppm

get_lrange() → RsCmwBluetoothSig.enums.SymbolTimeErrorLe[source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LRANge
value: enums.SymbolTimeErrorLe = driver.configure.rfSettings.dtx.sing.stError.tmode.lowEnergy.get_lrange()

Specifies the symbol timing error of the LE signal.

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

symbol_time_err: OFF | NEG50 | POS50 No symbol timing error, - 50 ppm or 50 ppm

set_le_1_m(symbol_time_err: RsCmwBluetoothSig.enums.SymbolTimeErrorLe) → None[source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LE1M
driver.configure.rfSettings.dtx.sing.stError.tmode.lowEnergy.set_le_1_m(symbol_time_err = enums.SymbolTimeErrorLe.NEG50)

Specifies the symbol timing error of the LE signal.

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

param symbol_time_err

OFF | NEG50 | POS50 No symbol timing error, - 50 ppm or 50 ppm

set_le_2_m(symbol_time_err: RsCmwBluetoothSig.enums.SymbolTimeErrorLe) → None[source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LE2M
driver.configure.rfSettings.dtx.sing.stError.tmode.lowEnergy.set_le_2_m(symbol_time_err = enums.SymbolTimeErrorLe.NEG50)

Specifies the symbol timing error of the LE signal.

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

param symbol_time_err

OFF | NEG50 | POS50 No symbol timing error, - 50 ppm or 50 ppm

set_lrange(symbol_time_err: RsCmwBluetoothSig.enums.SymbolTimeErrorLe) → None[source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:SING:STERror:TMODe:LENergy:LRANge
driver.configure.rfSettings.dtx.sing.stError.tmode.lowEnergy.set_lrange(symbol_time_err = enums.SymbolTimeErrorLe.NEG50)

Specifies the symbol timing error of the LE signal.

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

param symbol_time_err

OFF | NEG50 | POS50 No symbol timing error, - 50 ppm or 50 ppm