LowEnergy¶
SCPI Commands
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:FDRift:LENergy:LE1M
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:FDRift:LENergy:LRANge
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:FDRift:LENergy:LE2M
- class LowEnergy[source]
LowEnergy commands group definition. 3 total commands, 0 Sub-groups, 3 group commands
- get_le_1_m() → List[float][source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:FDRift:LENergy[:LE1M] value: List[float] = driver.configure.rfSettings.dtx.stab.fdrift.lowEnergy.get_le_1_m()
- Query the dirty transmitter frequency drift set according to the test specification for Bluetooth wireless technology.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
freq_drift: float Frequency drift is always enabled, according to the test specification for Bluetooth wireless technology.
- get_le_2_m() → List[float][source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:FDRift:LENergy:LE2M value: List[float] = driver.configure.rfSettings.dtx.stab.fdrift.lowEnergy.get_le_2_m()
- Query the dirty transmitter frequency drift set according to the test specification for Bluetooth wireless technology.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
freq_drift: float Frequency drift is always enabled, according to the test specification for Bluetooth wireless technology.
- get_lrange() → List[float][source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:FDRift:LENergy:LRANge value: List[float] = driver.configure.rfSettings.dtx.stab.fdrift.lowEnergy.get_lrange()
- Query the dirty transmitter frequency drift set according to the test specification for Bluetooth wireless technology.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
freq_drift: float Frequency drift is always enabled, according to the test specification for Bluetooth wireless technology.