LowEnergy

SCPI Commands

CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:MINDex:STABle:TMODe:LENergy:LRANge
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:MINDex:STABle:TMODe:LENergy:LE2M
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:MINDex:STABle:TMODe:LENergy:LE1M
class LowEnergy[source]

LowEnergy commands group definition. 3 total commands, 0 Sub-groups, 3 group commands

get_le_1_m() → List[float][source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:MINDex:STABle:TMODe:LENergy:LE1M
value: List[float or bool] = driver.configure.rfSettings.dtx.stab.mindex.stable.tmode.lowEnergy.get_le_1_m()
Return the modulation index h under the periodic change (10 values) for stable range h = 0.495 to 0.505.

INTRO_CMD_HELP: Refer also to the following commands:

  • LE direct test mode:

Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. For dirty transmitter parameters according to the test specification for Bluetooth wireless technology, see also ‘Dirty Tx Mode’.

INTRO_CMD_HELP: Refer also to the following commands:

  • LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

mod_index: float | ON | OFF Range: 0.495 to 0.505

get_le_2_m() → List[float][source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:MINDex:STABle:TMODe:LENergy:LE2M
value: List[float or bool] = driver.configure.rfSettings.dtx.stab.mindex.stable.tmode.lowEnergy.get_le_2_m()
Return the modulation index h under the periodic change (10 values) for stable range h = 0.495 to 0.505.

INTRO_CMD_HELP: Refer also to the following commands:

  • LE direct test mode:

Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. For dirty transmitter parameters according to the test specification for Bluetooth wireless technology, see also ‘Dirty Tx Mode’.

INTRO_CMD_HELP: Refer also to the following commands:

  • LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

mod_index: float | ON | OFF Range: 0.495 to 0.505

get_lrange() → List[float][source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:MINDex:STABle:TMODe:LENergy:LRANge
value: List[float or bool] = driver.configure.rfSettings.dtx.stab.mindex.stable.tmode.lowEnergy.get_lrange()
Return the modulation index h under the periodic change (10 values) for stable range h = 0.495 to 0.505.

INTRO_CMD_HELP: Refer also to the following commands:

  • LE direct test mode:

Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. For dirty transmitter parameters according to the test specification for Bluetooth wireless technology, see also ‘Dirty Tx Mode’.

INTRO_CMD_HELP: Refer also to the following commands:

  • LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

mod_index: float | ON | OFF Range: 0.495 to 0.505