LowEnergy¶

SCPI Commands

CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:STERror:NMODe:LENergy:LE2M
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:STERror:NMODe:LENergy:LRANge
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:STERror:NMODe:LENergy:LE1M

class LowEnergy[source]

LowEnergy commands group definition. 3 total commands, 0 Sub-groups, 3 group commands

get_le_1_m() → List[int][source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:STERror:NMODe:LENergy:LE1M
value: List[int] = driver.configure.rfSettings.dtx.stab.stError.nmode.lowEnergy.get_le_1_m()

Return the symbol timing error under the periodic change according to the test specification for Bluetooth wireless technology (10 values for BR and LE, 3 values for EDR) .

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available. For dirty transmitter parameters according to the test specification for Bluetooth wireless technology, see also ‘Dirty Tx Mode’.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

symbol_time_err: decimal Range: - 50 ppm to 50 ppm, for BR/EDR: - 20 ppm to 20 ppm , Unit: ppm

get_le_2_m() → List[int][source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:STERror:NMODe:LENergy:LE2M
value: List[int] = driver.configure.rfSettings.dtx.stab.stError.nmode.lowEnergy.get_le_2_m()

Return the symbol timing error under the periodic change according to the test specification for Bluetooth wireless technology (10 values for BR and LE, 3 values for EDR) .

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available. For dirty transmitter parameters according to the test specification for Bluetooth wireless technology, see also ‘Dirty Tx Mode’.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

symbol_time_err: decimal Range: - 50 ppm to 50 ppm, for BR/EDR: - 20 ppm to 20 ppm , Unit: ppm

get_lrange() → List[int][source]

# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:STAB:STERror:NMODe:LENergy:LRANge
value: List[int] = driver.configure.rfSettings.dtx.stab.stError.nmode.lowEnergy.get_lrange()

Return the symbol timing error under the periodic change according to the test specification for Bluetooth wireless technology (10 values for BR and LE, 3 values for EDR) .

INTRO_CMD_HELP: Refer also to the following commands:

RF tests:

Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available. For dirty transmitter parameters according to the test specification for Bluetooth wireless technology, see also ‘Dirty Tx Mode’.

INTRO_CMD_HELP: Refer also to the following commands:

LE connection tests (normal mode) :

Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.

INTRO_CMD_HELP: Refer also to the following commands:

LE test mode:

Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.

return

symbol_time_err: decimal Range: - 50 ppm to 50 ppm, for BR/EDR: - 20 ppm to 20 ppm , Unit: ppm