Mber¶
SCPI Commands
CONFigure:BLUetooth:SIGNaling<Instance>:RXQuality:LIMit:MBER:BRATe
CONFigure:BLUetooth:SIGNaling<Instance>:RXQuality:LIMit:MBER:EDRate
- class Mber[source]
Mber commands group definition. 5 total commands, 1 Sub-groups, 2 group commands
- get_brate() → float[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RXQuality:LIMit:MBER:BRATe value: float or bool = driver.configure.rxQuality.limit.mber.get_brate()
Specifies the upper BER limit for BR RX measurements.
- return
limit: numeric | ON | OFF Range: 0 % to 100 %, Unit: % Additional parameters: OFF | ON (disables the limit | enables the limit using the previous/default level)
- get_edrate() → float[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RXQuality:LIMit:MBER:EDRate value: float or bool = driver.configure.rxQuality.limit.mber.get_edrate()
Specifies the upper BER limit for EDR RX measurements.
- return
limit: numeric | ON | OFF Range: 0 % to 100 %, Unit: % Additional parameters: OFF | ON (disables the limit | enables the limit using the previous/default level)
- set_brate(limit: float) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RXQuality:LIMit:MBER:BRATe driver.configure.rxQuality.limit.mber.set_brate(limit = 1.0)
Specifies the upper BER limit for BR RX measurements.
- param limit
numeric | ON | OFF Range: 0 % to 100 %, Unit: % Additional parameters: OFF | ON (disables the limit | enables the limit using the previous/default level)
- set_edrate(limit: float) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RXQuality:LIMit:MBER:EDRate driver.configure.rxQuality.limit.mber.set_edrate(limit = 1.0)
Specifies the upper BER limit for EDR RX measurements.
- param limit
numeric | ON | OFF Range: 0 % to 100 %, Unit: % Additional parameters: OFF | ON (disables the limit | enables the limit using the previous/default level)
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.rxQuality.limit.mber.clone()
Subgroups