Mode¶
SCPI Commands
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:EDRate
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:BRATe
- class Mode[source]
Mode commands group definition. 11 total commands, 3 Sub-groups, 2 group commands
- get_brate() → RsCmwBluetoothSig.enums.DtxMode[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:BRATe value: enums.DtxMode = driver.configure.rfSettings.dtx.mode.get_brate()
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
dtx_mode: SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
- get_edrate() → RsCmwBluetoothSig.enums.DtxMode[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:EDRate value: enums.DtxMode = driver.configure.rfSettings.dtx.mode.get_edrate()
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
dtx_mode: SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
- set_brate(dtx_mode: RsCmwBluetoothSig.enums.DtxMode) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:BRATe driver.configure.rfSettings.dtx.mode.set_brate(dtx_mode = enums.DtxMode.SINGle)
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param dtx_mode
SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
- set_edrate(dtx_mode: RsCmwBluetoothSig.enums.DtxMode) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:EDRate driver.configure.rfSettings.dtx.mode.set_edrate(dtx_mode = enums.DtxMode.SINGle)
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param dtx_mode
SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.rfSettings.dtx.mode.clone()
Subgroups