LowEnergy¶
SCPI Commands
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy:LE1M
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy:LRANge
CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy:LE2M
- class LowEnergy[source]
LowEnergy commands group definition. 3 total commands, 0 Sub-groups, 3 group commands
- get_le_1_m() → RsCmwBluetoothSig.enums.DtxMode[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy[:LE1M] value: enums.DtxMode = driver.configure.rfSettings.dtx.mode.lowEnergy.get_le_1_m()
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
dtx_mode: SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
- get_le_2_m() → RsCmwBluetoothSig.enums.DtxMode[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy:LE2M value: enums.DtxMode = driver.configure.rfSettings.dtx.mode.lowEnergy.get_le_2_m()
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
dtx_mode: SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
- get_lrange() → RsCmwBluetoothSig.enums.DtxMode[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy:LRANge value: enums.DtxMode = driver.configure.rfSettings.dtx.mode.lowEnergy.get_lrange()
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- return
dtx_mode: SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
- set_le_1_m(dtx_mode: RsCmwBluetoothSig.enums.DtxMode) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy[:LE1M] driver.configure.rfSettings.dtx.mode.lowEnergy.set_le_1_m(dtx_mode = enums.DtxMode.SINGle)
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param dtx_mode
SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
- set_le_2_m(dtx_mode: RsCmwBluetoothSig.enums.DtxMode) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy:LE2M driver.configure.rfSettings.dtx.mode.lowEnergy.set_le_2_m(dtx_mode = enums.DtxMode.SINGle)
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param dtx_mode
SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.
- set_lrange(dtx_mode: RsCmwBluetoothSig.enums.DtxMode) → None[source]
# SCPI: CONFigure:BLUetooth:SIGNaling<Instance>:RFSettings:DTX:MODE:LENergy:LRANge driver.configure.rfSettings.dtx.mode.lowEnergy.set_lrange(dtx_mode = enums.DtxMode.SINGle)
- Configure the dirty transmitter.
INTRO_CMD_HELP: Refer also to the following commands:
RF tests:
Commands for test mode classic (..:BRATe..) , (..:EDRate..) and for LE direct test mode (..:LE1M..) , (..:LE2M..) , (.. :LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE connection tests (normal mode) :
Commands for uncoded LE 1M PHY (..:NMODe:LENergy:LE1M..) , LE 2M PHY (..:NMODe:LENergy:LE2M..) , and LE coded PHY (.. :NMODe:LENergy:LRANge..) are available.
INTRO_CMD_HELP: Refer also to the following commands:
LE test mode:
Commands for uncoded LE 1M PHY (..:TMODe:LENergy:LE1M..) , LE 2M PHY (..:TMODe:LENergy:LE2M..) , and LE coded PHY (.. :TMODe:LENergy:LRANge..) are available.
- param dtx_mode
SINGle values | SPEC table SING: single set of dirty transmitter parameters. No periodic change of the frequency offset, modulation index, and symbol timing error occurs. SPEC: settings according to the test specification for Bluetooth wireless technology, see ‘Dirty Tx Mode’.